| MECHANICAL SPECIFICATIONS |
| Materials |
Housing: Stainless Steel AISI304L (1.4307)
Flange: Stainless Steel AISI304L (1.4307)
Shaft: Stainless Steel AISI304L (1.4307) |
| Bearings |
Ballraces |
| Bearings lifetime |
1×1010 rev. |
| Housing fixing |
Flexible flange |
| Permited misalignment |
±0.5 mm axial, ±0.3 mm radial |
| Shaft fixing |
Clamp (anodized aluminium 20 μm) |
| Blind hollow shaft diameter |
6 mm (other shaft diameter available, upon request) |
| Maximum number of revolutions permitted mechanically |
6000 rpm |
| Protection against dust and splashes according to DIN EN 60529 |
IP67 |
| Rotor inertia moment |
30 gcm2 |
| Starting torque at 20ºC (68ºF) |
≤ 0,02 Nm |
| Maximum load permitted on axial shaft |
40 N |
| Maximum load permitted on radial shaft |
60 N |
| Weight aprox. |
0,5 Kg |
| Operating temperature range |
-20°C to +85°C |
| Vibration according to DIN EN 60068-2-6 |
100 m/s2 (10Hz…2000Hz) |
| Shock according to DIN EN 60068-2-27 |
1000 m/s2 (6ms) |
| Resistant to salt mist (NSS) |
according to ISO 9227:2006-10 (274 h) |
| Radial connection |
2 meters cable (other cable lenghts available or connector
mounted at the end of the cable, upon request) |
